Matrix L4-1.8L (1ZZ-FE) (2008)
/Page-875001.png)
Pressure Plate: Specifications
CLUTCH COVER ASSEMBLY
-
Align the matchmarks on the clutch cover assembly and flywheel sub-assembly.
-
Following the procedures shown in the illustration, tighten the 6 bolts, in the order starting the bolt locating near the knock pin on the top.
Torque: 19 Nm (195 kgf-cm, 14 ft-lbf)
HINT: Following the order in the illustration, tighten the bolts at a time evenly.