Matrix 2WD L4-1.8L (1ZZ-FE) (2003)
![background image](/toyota/matrix_2wd/l4-1.8l_(1zz-fe)/Page-1169003.png)
5.
Remove Instrument Cluster Finish Panel Sub-assembly Center.
A.
Power point socket models only:
Disengage the 5 claws and remove the switch base.
B.
Remove the control knob.
C.
Remove the screw.
D.
Using a molding remover, disengage the 2 clips and 7 claws, then pull out the instrument cluster center panel.
E.
Disconnect the connectors.
6.
Remove Console Box.
A.
Open console box.
B.
Pull the console box upward to remove it.