Matrix 2WD L4-1.8L (1ZZ-FE) (2003)
/Page-1232001.png)
Mud Flap: Service and Repair
SIDE MUDGUARD SUB-ASSEMBLY LH
REPLACEMENT
HINT: Use the same procedures for the RH side and LH side.
1. REMOVE SIDE MUDGUARD SUB-ASSEMBLY LH
a. Using a clip remover, remove the 8 retainers and 9 clips.
b. Using a moulding remover, remove the mudguard.
2. INSTALL SIDE MUDGUARD SUB-ASSEMBLY LH
a. Install the mudguard with 9 new clips.
b. Install the 8 retainers to the mudguard.