Matrix 2WD L4-1.8L (1ZZ-FE) (2003)
/Page-822002.png)
c. Disconnect the 2 or 3 brake tubes from the clamp, and move brake tubes aside.
d. Remove the 4 nuts and clevis.
e. Pull out the brake booster and gasket.
9. INSTALL BRAKE BOOSTER ASSY
a. Install the clevis to the booster push rod.
b. Install a new gasket and brake booster with the 4 nuts.
Torque: 12.7 Nm (130 kgf-cm, 9 ft. lbs.)
c. Connect the 2 or 3 brake tubes to the clamp.
d. Connect the vacuum hose to the brake booster.