Matrix 2WD L4-1.8L (1ZZ-FE) (2003)
64. INSTALL TRANSVERSE ENGINE ENGINE MOUNTING BRACKET
a. Install the transverse engine engine mounting bracket with the 3 bolts.
Torque: 47 Nm (479 kgf-cm, 35 ft. lbs.)
65. INSTALL WATER PUMP ASSY
66. INSTALL V-RIBBED BELT TENSIONER ASSY
a. Install the V-ribbed belt tensioner with the nut and bolt.
Torque:
Nut 29 Nm (296 kgf-cm, 21 ft. lbs.)
Bolt 69 Nm (704 kgf-cm, 51 ft. lbs.)
67. INSTALL CRANKSHAFT PULLEY
a. Align the pulley set key with the key groove of the pulley, and slide on the pulley.
b. Using SST, install the crankshaft pulley bolt.
SST 09960-10010 (09962-01000, 09963-01000)
Torque: 138 Nm (1,407 kgf-cm, 102 ft. lbs.)
c. Turn the crankshaft counterclockwise, and disconnect the plunger knock pin form the hook.