Matrix 2WD L4-1.8L (1ZZ-FE) (2003)
b. Using a vise pliers, hold the magnet clutch hub.
c. Remove the bolt, magnet clutch hub and magnet clutch washer.
d. Using a snap ring expander, remove the snap ring and magnet clutch rotor.
e. Remove the screw, disconnect the connector.
f.
Using a snap ring expander, remove the snap ring and magnet clutch starter.
8. REMOVE COOLER COMPRESSOR ASSY
9. INSTALL MAGNET CLUTCH ASSY
a. Matching the parts shown in the illustration, install the magnet clutch starter.