Matrix 2WD L4-1.8L (1ZZ-FE) (2003)
/Page-1078005.png)
NOTE: Do not make the anchor part run onto the protrusion part of the floor panel.
d. Check the ELR lock.
NOTE: Check should be performed with the assembly installed.
1. Check that the belt will lock when pulling out the belt quickly with the belt installed
If the operation is not as specified, replace the rear seat belt assembly outer.
e. Check the fastening function of the child restraint system.
NOTE: Check should be performed with the assembly installed.
1. Check that the belt cannot be pulled out any more but can be rewound after the belt is fully pulled out.
2. Check that the belt can be pulled out and rewound after the belt is fully rewound.
If the operation is not as specified, replace the rear seat belt assembly outer.
26. INSTALL REAR SEAT CUSHION ASSY AND REAR SEAT BACK ASSY