Matrix 2WD L4-1.8L (1ZZ-FE) (2003)
Axle Beam: Service and Repair
REPLACEMENT
HINT: COMPONENTS: See Suspension; Diagrams; Exploded Views.
1. REMOVE REAR WHEEL
2. SEPARATE REAR DISC BRAKE CALIPER ASSY LH (DISC REAR BRAKE TYPE)
3. SEPARATE REAR DISC BRAKE CALIPER ASSY RH (DISC REAR BRAKE TYPE)
4. REMOVE REAR DISC (DISC REAR BRAKE TYPE)
HINT: Use the same manner described to the other side.
5. REMOVE REAR BRAKE DRUM SUB-ASSY (DRUM REAR BRAKE TYPE)
HINT: Use the same manner described to the other side.
6. DISCONNECT SKID CONTROL SENSOR WIRE (W/ ABS)
a. Disconnect the skid control sensor connector.
b. Remove the bolt and clip, disconnect the skid control sensor wire.
c. Use the same manner described to the other side.
7. DISCONNECT PARKING BRAKE CABLE ASSY NO.3
a. Remove the bolt, disconnect parking brake cable No.3.
8. DISCONNECT PARKING BRAKE CABLE ASSY NO.2
a. Remove the bolt, disconnect parking brake cable No.2.
9. REMOVE STABILIZERS BAR REAR
10. DISCONNECT REAR BRAKE TUBE NO.4 (DRUM REAR BRAKE TYPE)
a. Using SST, disconnect the rear brake tube No.4 from the flexible hose. Use a container to catch brake fluid as it drains out.
SST 09023-00100
b. Remove the clip and disconnect the flexible hose.
11. DISCONNECT REAR BRAKE TUBE NO.3 (DRUM REAR BRAKE TYPE)
SST 09023-00100
HINT: Disconnect the RH side by the same procedures as the LH side.