Matrix 2WD L4-1.8L (1ZZ-FE) (2003)
/Page-729002.png)
7. REMOVE AIR BAG SENSOR ASSY CENTER
8. REMOVE FLOOR SHIFT CABLE TRANSMISSION CONTROL SHIFT
a. Remove the clip, washer and disconnect the cable end of the shift cable from the transaxle.
b. Remove the clip and disconnect the shift cable from the bracket.
c. Remove the 2 nuts and disconnect the shift cable.
d. Disconnect the shift cable from the clamp.
e. Remove the 2 bolts and shift cable grommet retainer.
f.
Remove the clip, washer and disconnect the cable end of the shift cable from the shift lever assy.
g. Turn the lock and disconnect the shift cable from the shift lever assy.
h. Pull out the shift cable from the floor.
9. INSTALL FLOOR SHIFT CABLE TRANSMISSION CONTROL SHIFT