Matrix 4WD L4-1.8L (1ZZ-FE) (2004)
Starter Motor: Service and Repair
Disassembly and Reassembly
OVERHAUL
1. REMOVE REPAIR SERVICE STARTER KIT
(a) Remove the nut, then disconnect the lead wire from terminal C.
(b) Remove the 2 screws which are used to secure the repair service starter kit to the starter drive housing.
(c) Remove the repair service starter kit.
(d) Remove the return spring and plunger from the starter drive housing.
2. REMOVE STARTER YOKE ASSY
(a) Remove the 2 through bolts, then pull out the starter yoke together with the starter commutator end frame.
(b) Remove the starter yoke from the starter commutator end frame.