toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Power Window Switch > < Heated Glass Element Switch|Locations|Page 6317
Page 1
background image

Heated Glass Element Switch: Testing and Inspection

INSPECT REAR WINDOW DEFOGGER SWITCH ASSY

a. Inspect the defogger switch continuity.

1. Connect the positive (+) lead from the battery to terminal 2 and negative (-) lead to terminal 3, and then check that the indicator light will light

up.
If the result is not as specified, replace the switch or bulb.

b. Inspect the defogger timer operation.

1. Connect the positive (+) lead from the battery to terminal 2 and negative (-) lead to terminal 3.
2. Connect the positive (+) lead from the battery to terminal 6 through a 1.4 W test bulb.
3. Push the defogger switch ON, and check that the indicator light in the switch and test bulb will light up for 12 to 18 minutes then the indicator

light and test bulb will go out.
If the result is not as specified, replace the switch.

Power Window Switch > < Heated Glass Element Switch|Locations|Page 6317