Matrix FWD L4-1.8L (2ZR-FE) (2010)
/Page-2074007.png)
(b) Move the rear door lock assembly downward and pull the release plate out of the rear door outside handle frame.
23. REMOVE REAR DOOR LOCK ASSEMBLY (w/ Power Door Lock)
(a) Using a "TORX" socket wrench (T30), remove the 3 screws.
(b) Move the rear door lock assembly downward and pull the release plate out of the rear door outside handle frame.
(c) Remove the door lock wiring harness seal from the rear door lock assembly.
24. REMOVE REAR DOOR LOCK REMOTE CONTROL CABLE ASSEMBLY (w/o Power Door Lock)
(a) Remove the rear door lock remote control cable assembly.
25. REMOVE REAR DOOR LOCK REMOTE CONTROL CABLE ASSEMBLY (w/ Power Door Lock)
(a) Using a screwdriver, disengage the claw.