Matrix FWD L4-1.8L (2ZR-FE) (2010)
20. REMOVE REAR DOOR WINDOW REGULATOR SUB-ASSEMBLY (w/ Power Window)
(a) Disconnect the connector.
(b) Loosen the temporary bolt.
NOTICE:
Do not remove the temporary bolt. If the temporary bolt is removed, the rear door window regulator may fall and cause damage.
(c) Remove the 3 bolts.
(d) Remove the rear door window regulator sub-assembly and the rear power window regulator motor assembly as a unit.
(e) Remove the temporary bolt from the rear door window regulator sub-assembly.
21. REMOVE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY (w/ Power Window)
(a) Connect a positive (+) lead of the battery to terminal 1, and a negative (-) lead to terminal 2 of the rear power window regulator motor
assembly to move the lift arm to the position shown in the illustration.
(b) Using a "TORX" socket wrench (T25), remove the 3 screws and the rear power window regulator motor assembly.
22. REMOVE REAR DOOR LOCK ASSEMBLY (w/o Power Door Lock)
(a) Using a "TORX" socket wrench (T30), remove the 3 screws.