Matrix FWD L4-1.8L (2ZR-FE) (2010)
Fuel Door Release Cable: Service and Repair
Installation
DOOR / HATCH: FUEL LID LOCK CONTROL CABLE ASSEMBLY: INSTALLATION
1. INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY
(a) Engage the 8 clamps and install the fuel lid lock control cable sub-assembly.
(b) Engage the 2 claws and connect the fuel lid lock control cable sub-assembly as shown in the illustration.
(c) Connect the fuel lid lock control cable sub-assembly as shown in the illustration.
2. INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY
(a) Install the fuel lid lock open lever sub-assembly with the bolt.