Matrix FWD L4-1.8L (2ZR-FE) (2010)
/Page-2100001.png)
Trunk / Liftgate Lock: Service and Repair
Removal
DOOR LOCK: BACK DOOR LOCK: REMOVAL
1. REMOVE BACK DOOR CENTER GARNISH See: Service and Repair/Disassembly
2. REMOVE BACK DOOR SIDE GARNISH LH See: Service and Repair/Disassembly
3. REMOVE BACK DOOR SIDE GARNISH RH See: Service and Repair/Disassembly
4. REMOVE BACK DOOR TRIM BOARD ASSEMBLY See: Service and Repair/Disassembly
5. REMOVE BACK DOOR LOCK ASSEMBLY
(a) Disconnect the back door lock control cable sub-assembly.
(b) Disconnect the rod as shown in the illustration.
(c) Disconnect the connector.
(d) Remove the 3 bolts and back door lock assembly.
