Matrix FWD L4-1.8L (2ZR-FE) (2010)
HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.
(3) Install the name plate as shown in the illustration.
for S plate:
Standard Measurement:
(4) for XRS plate:
Standard Measurement:
6. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR NAME PLATE
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove any double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.