Matrix FWD L4-1.8L (2ZR-FE) (2010)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Installation
2ZR-FE ENGINE CONTROL: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION
1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR
(a) Install the engine coolant temperature sensor through a new gasket.
Torque : 20 Nm (200 kgf-cm, 14 ft-lbf)
(b) Connect the engine coolant temperature sensor connector.
2. ADD ENGINE COOLANT See: Coolant/Service and Repair
3. INSPECT FOR COOLANT LEAK See: Testing and Inspection
4. INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH HOSE See: Powertrain Management/Fuel Delivery and Air Induction/Throttle
Body/Service and Repair/Installation
5. INSTALL NO. 2 CYLINDER HEAD COVER See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation