Matrix FWD L4-1.8L (2ZR-FE) (2010)
2. REMOVE NO. 2 SWITCH HOLE BASE See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Lower Instrument Panel/Removal
3. REMOVE POWER POINT SOCKET ASSEMBLY
(a) Disengage the claw and remove the power point socket assembly.
4. REMOVE POWER OUTLET SOCKET COVER
(a) Disengage the 2 claws and remove the power outlet socket cover.
Installation
POWER OUTLETS (INT): POWER OUTLET SOCKET: INSTALLATION
1. INSTALL POWER OUTLET SOCKET COVER
(a) Engage the 2 claws to install the power outlet socket cover.
2. INSTALL POWER POINT SOCKET ASSEMBLY
(a) Engage the claw to install the power point socket assembly.
3. INSTALL NO. 2 SWITCH HOLE BASE See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Lower Instrument Panel/Installation