Matrix FWD L4-1.8L (2ZR-FE) (2010)
![background image](/toyota/matrix_fwd/l4-1.8l_(2zr-fe)/Page-910052.png)
C -- REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (CAN NO. 2 JUNCTION CONNECTOR - SKID
CONTROL ECU)
B -- REPLACE BRAKE ACTUATOR ASSEMBLY See: Brakes and Traction Control/Antilock Brakes / Traction Control
Systems/Hydraulic Control Assembly - Antilock Brakes/Service and Repair/Brake Actuator (w/o VSC)/Removal
A -- REPLACE BRAKE ACTUATOR ASSEMBLY See: Brakes and Traction Control/Antilock Brakes / Traction Control
Systems/Hydraulic Control Assembly - Antilock Brakes/Service and Repair/Brake Actuator (w/ VSC)/Removal
5. CHECK FOR SHORT TO B+ IN CAN BUS WIRE (CAN NO. 2 JUNCTION CONNECTOR - ECM)
(a) Disconnect the ECM connector.
(b) Measure the resistance according to the value(s) in the table below.
HINT
The resistance must be measured after the CAN No. 2 junction connector is disconnected.
Standard Resistance: