Matrix FWD L4-1.8L (2ZR-FE) (2010)
Canister Purge Control Valve: Testing and Inspection
2ZR-FE EMISSION CONTROL: PURGE VALVE: INSPECTION
1. INSPECT DUTY VACUUM SWITCHING VALVE
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(b) Check the operation of the purge VSV.
(1) Check that air does not flow from port E to port F.
(2) Apply battery voltage across terminals 1 and 2.
(3) Check that air flows from port E to port F.
If the result is not as specified, replace the purge VSV.