Matrix FWD L4-1.8L (2ZR-FE) (2010)
Canister Purge Control Valve: Service and Repair
Installation
2ZR-FE EMISSION CONTROL: PURGE VALVE: INSTALLATION
1. INSTALL DUTY VACUUM SWITCHING VALVE
(a) Install the duty vacuum switching valve with the screw.
Torque : 3.4 Nm (35 kgf-cm, 30 in-lbf)
(b) Connect the duty vacuum switching valve connector, 2 vacuum hoses and wire harness clamp.
2. INSTALL NO. 2 CYLINDER HEAD COVER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation