Matrix FWD L4-1.8L (2ZR-FE) (2010)
Fuel Injector: Testing and Inspection
2ZR-FE FUEL: FUEL INJECTOR: INSPECTION
1. INSPECT FUEL INJECTOR ASSEMBLY
(a) Check the resistance.
(1) Using an ohmmeter, measure the resistance according to the value(s) in the table below.
Standard Resistance:
(2) If the result is not as specified, replace the injector assembly.
(b) Check the operation.
CAUTION:
Perform the inspection in a well-ventilated area.
Do not perform the inspection near a naked flame.
(1) Connect SST (fuel tube connector) to SST (hose), then connect them to the fuel pipe (vehicle side).
SST : 09268-31012
90467-13001
95336-08070
09268-41500
(2) Install the O-ring onto the fuel injector assembly.