Matrix FWD L4-1.8L (2ZR-FE) (2010)
/Page-1522002.png)
2. REMOVE NO. 2 SWITCH HOLE BASE See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Lower Instrument Panel/Removal
3. REMOVE POWER POINT SOCKET ASSEMBLY
(a) Disengage the 2 claws and remove the power point socket assembly.
Installation
POWER OUTLETS (INT): POWER OUTLET SOCKET (w/ Voltage Inverter): INSTALLATION
1. INSTALL POWER POINT SOCKET ASSEMBLY
(a) Engage the 2 claws to install the power point socket assembly.
2. INSTALL NO. 2 SWITCH HOLE BASE See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Lower Instrument Panel/Installation
3. INSTALL FRONT UPPER CONSOLE BOX See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Lower Instrument Panel/Installation
