Matrix FWD L4-1.8L (2ZR-FE) (2010)
/Page-1481001.png)
Starter Relay: Testing and Inspection
2ZR-FE STARTING: RELAY: ON-VEHICLE INSPECTION
1. INSPECT STARTER RELAY
(a) Check the resistance.
(1) Using an ohmmeter, measure the resistance between the terminals.
Standard Resistance:
(2) If the result is not as specified, replace the relay.
2. INSPECT ACC RELAY
(a) Check the resistance.
(1) Using an ohmmeter, measure the resistance between the terminals.
Standard Resistance:
(2) If the result is not as specified, replace the relay.
3. INSPECT ACC CUT RELAY
(a) Check the resistance.
