Matrix FWD L4-1.8L (2ZR-FE) (2010)
(b) Using a T25 "TORX" socket wrench, install the drive housing with the 2 bolts.
Torque : 6.0 Nm (61 kgf-cm, 53 in-lbf)
8. INSTALL MAGNET STARTER SWITCH ASSEMBLY
(a) Apply high-temperature grease to the plunger hook.
(b) Hang the plunger of the magnet starter switch assembly into the drive lever from the upper side.
(c) Install the magnet starter switch assembly with the 2 nuts.
Torque : 7.5 Nm (77 kgf-cm, 66 in-lbf)
(d) Connect the lead wire to the magnet starter switch, then fasten it with the nut.