Matrix FWD L4-1.8L (2ZR-FE) (2010)
(b) Support the upper control arm assembly securely.
(c) Put matchmarks on the rear No. 2 suspension toe adjust plate, rear suspension toe adjust cam sub-assembly and rear No. 1 suspension arm
assembly.
(d) Remove the nut, the rear No. 2 suspension toe adjust plate and rear suspension toe adjust cam sub-assembly.
(e) Remove the bolt and nut, and disconnect the rear shock absorber with coil spring.
(f) Remove the bolt and nut, and separate the rear part of the rear No. 1 suspension arm assembly.
NOTICE:
When removing the bolt, stop the nut from rotating and loosen the bolt.
(g) Remove the 3 bolts on the front part, and separate the front part of the rear No. 1 suspension arm assembly.