Matrix FWD L4-1.8L (2ZR-FE) (2010)
(d) Install the cable end to the shift lever assembly.
NOTICE:
*
Check that the lock piece is pulled up.
*
Install the cable end all the way to the base of the pin.
(e) Push the lock piece into the adjuster case.
NOTICE:
Securely push in the lock piece until it locks.
3. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Lower Instrument Panel/Installation