Matrix FWD L4-1.8L (2ZR-FE) (2010)
19. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Lower Instrument Panel/Removal
20. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY
(a) Disconnect the control shift cable from the shift lever assembly.
(b) Disconnect the control select cable from the shift lever assembly.
(c) Using a screwdriver, pull out the stopper of the transmission control cable.
NOTICE:
Do not remove the stopper. If it is removed, reinstall it to its original position.
(d) Rotate the nut counterclockwise approximately 180° and, while holding the nut in that position, disconnect the transmission control cable from
the shift lever retainer.
NOTICE:
Do not rotate the nut excessively as it will come off the internal spring and the transmission control cable will not be reusable.
(e) Remove the 2 clips and disconnect the 2 transmission control cables from the control cable bracket*1.