Matrix FWD L4-1.8L (2ZR-FE) (2010)
(c) Push the two claws together at the top of the transmission control cable lock piece. While holding the two claws together, push the two lugs on
the bottom of the lock piece toward each other and upward to pull out the lock piece.
(d) Install the control shift cable to the shift lever assembly.
(e) Install the control select cable to the shift lever assembly.
NOTICE:
*
Make sure to adjust the length at the neutral shift position.
*
Make sure that the lock piece is protruding from the adjuster case.
(f) Press in and lock the lock piece to the adjuster case.