Matrix FWD L4-1.8L (2ZR-FE) (2010)
Standard Measurement:
HINT
If the primer is applied to an area that is not specified, wipe off the primer with a non-residue solvent before it dries.
NOTICE:
*
To prevent the glass from breaking at low temperatures, ensure that no primer adheres to the contact surface between the
moulding and glass during application.
*
Allow the primer to dry for 3 minutes or more.
*
Throw away any leftover Primer.
*
Do not apply too much primer.
(c) Apply adhesive to the quarter window assembly.
Adhesive:
Toyota Genuine Windshield Glass Adhesive or equivalent
(1) Cut off the tip of the cartridge nozzle as shown in the illustration.