Matrix FWD L4-1.8L (2ZR-FE) (2010)
Windshield Washer Spray Nozzle: Adjustments
WIPER / WASHER: WIPER AND WASHER SYSTEM: PRECAUTION
1. PRECAUTION OF WASHER NOZZLE ADJUSTMENT
(a) Do not clean or adjust the washer nozzle with a safety pin, etc. because:
(1) the washer nozzle tip is made of resin and could be damaged.
(2) adjustment is not necessary for this spray type washer nozzle. If it is necessary to change the nozzle angle, replace the washer nozzle with
one that has a different nozzle angle See: .
(b) If the washer nozzle is clogged with wax, etc., remove it and clean the nozzle hole with a soft resin brush or other cleaning tool.
WIPER / WASHER: WASHER NOZZLE: ADJUSTMENT
1. REMOVE WASHER NOZZLE SUB-ASSEMBLY See: Service and Repair/Removal
2. ADJUST WASHER NOZZLE SUB-ASSEMBLY
(a) Select a washer nozzle sub-assembly so that the washer fluid spray area is as specified.
3. INSTALL WASHER NOZZLE SUB-ASSEMBLY See: Service and Repair/Installation