Matrix FWD L4-2.4L (2AZ-FE) (2009)
NAVIGATION / MULTI INFO DISPLAY: NAVIGATION ANTENNA CORD: REMOVAL
REMOVAL
1. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY
HINT: Refer to the procedures up to Remove Upper Instrument Panel Sub-assembly See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Upper Instrument Panel/Removal.
2. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH BRACKET See: Navigation System/Navigation Display/Service and
Repair/Removal
3. REMOVE NAVIGATION ANTENNA CORD SUB-ASSEMBLY
(a) Disengage the 2 clamps and remove the navigation antenna cord sub-assembly.
Installation
NAVIGATION / MULTI INFO DISPLAY: NAVIGATION ANTENNA CORD: INSTALLATION
INSTALLATION
1. INSTALL NAVIGATION ANTENNA CORD SUB-ASSEMBLY
(a) Engage the 2 clamps and install the navigation antenna cord sub-assembly.
2. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET See: Navigation System/Navigation Display/Service and
Repair/Installation
3. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY
HINT: Refer to the procedures from Install Upper Instrument Panel Sub-assembly See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Upper Instrument Panel/Installation.