Matrix FWD L4-2.4L (2AZ-FE) (2009)
/Page-2167001.png)
Fuel Door Release Cable: Service and Repair
Installation
DOOR / HATCH: FUEL LID LOCK CONTROL CABLE ASSEMBLY: INSTALLATION
INSTALLATION
1. INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY
(a) Engage the 8 clamps and install the fuel lid lock control cable sub-assembly.
(b) Engage the 2 claws and connect the fuel lid lock control cable sub-assembly as shown in the illustration.
(c) Connect the fuel lid lock control cable sub-assembly as shown in the illustration.
2. INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY