Matrix FWD L4-2.4L (2AZ-FE) (2009)
/Page-2170001.png)
Hood Latch Release Cable: Service and Repair
Installation
DOOR / HATCH: HOOD LOCK CONTROL CABLE ASSEMBLY: INSTALLATION
INSTALLATION
1. INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY
(a) Pass the hood lock control cable assembly into the engine compartment.
(b) Pass the cable through the upper radiator support.
(c) Connect the clamps as shown in the illustration.
2. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
(a) Install the hood lock control lever and connect the hood lock control cable.
3. INSTALL HOOD LOCK ASSEMBLY
(a) Apply MP grease to the sliding areas of the lock.