Matrix FWD L4-2.4L (2AZ-FE) (2009)
/Page-2194005.png)
(a) Support the rear suspension member using a jack and wooden block.
(b) Remove the 2 bolts and 2 nuts from the rear suspension member.
(c) Lower the rear suspension member.
63. REMOVE REAR SUSPENSION MEMBER (for 4WD)
(a) Disconnect the wire harness connector and the hose.
(b) Disengage the 6 clamps and separate the wire harness and hose.
(c) Support the rear suspension member using a jack and wooden block.