Matrix FWD L4-2.4L (2AZ-FE) (2009)
(a) Engage the clip.
(b) Install the upper center pillar garnish LH with the 2 screws.
63. INSTALL LOWER CENTER PILLAR GARNISH LH
(a) Engage the 2 claws and 2 clips, and install the lower center pillar garnish LH.
64. CONNECT FRONT SEAT OUTER BELT ASSEMBLY LH See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Front Seat
Outer Belt Assembly/Installation
65. INSTALL LAP BELT OUTER ANCHOR COVER (for Driver Side) See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Front
Seat Outer Belt Assembly/Installation
66. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
(a) Align the alignment mark (orange) on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and
install the rear door opening trim weatherstrip LH.
NOTE: After installation, check that the corners fit correctly.
67. INSTALL REAR DOOR SCUFF PLATE LH