Matrix FWD L4-2.4L (2AZ-FE) (2009)
-
Do not touch or move any components inside the transmitter. It may cease to work.
4. INSTALL TRANSMITTER BATTERY
(a) Install a battery (lithium battery: CR2025) with the positive (+) side facing upward, as shown in the illustration.
NOTICE:
-
Be careful not to bend the transmitter battery electrode during insertion.
-
Keep the transmitter cover interior free of dust and oil.
(b) Install the cover.
5. INSTALL DOOR CONTROL TRANSMITTER MODULE
(a) Install the door control transmitter module into the transmitter housing case.
6. INSTALL TRANSMITTER HOUSING COVER
(a) Install the transmitter housing cover to the transmitter housing case.
(b) Check that the transmitter LED illuminates when the switch is pressed.
OK:
Transmitter LED illuminates when switch is pressed.