toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Parking Brake Cable (for Double Wishbone Type Suspension)|Page 4574 > < Parking Brake Cable (for Double Wishbone Type Suspension)|Page 4572
Page 8
background image

2. REMOVE FRONT SEAT ASSEMBLY LH

HINT:  Refer to the instructions for Removal of the front seat assembly (w/o Seatback Board)  See: Body and Frame/Seats/Service and
Repair/Front Seat Assembly (w/o Seatback Board)/Removal.

3. REMOVE FRONT SEAT ASSEMBLY RH (w/o Seatback Board)

HINT:  Perform the same procedure for the LH side.

4. REMOVE FRONT SEAT ASSEMBLY RH (w/ Seatback Board)

HINT:  Refer to the instructions for Removal of the front seat assembly (w/ Seatback Board)  See: Body and Frame/Seats/Service and
Repair/Front Seat Assembly (w/ Seatback Board)/Removal.

5. REMOVE FRONT CONSOLE BOX ASSEMBLY

HINT:  Refer to the instructions for Removal of the front console box  See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Removal.

6. REMOVE NO. 2 BELT ANCHOR REINFORCEMENT SUB-ASSEMBLY See: Parking Brake Lever/Service and Repair/Removal
7. REMOVE NO. 3 BELT ANCHOR REINFORCEMENT SUB-ASSEMBLY See: Parking Brake Lever/Service and Repair/Removal
8. SEPARATE PARKING BRAKE EQUALIZER See: Parking Brake Lever/Service and Repair/Removal
9. REMOVE PARKING BRAKE LEVER ASSEMBLY See: Parking Brake Lever/Service and Repair/Removal

10. REMOVE PARKING BRAKE EQUALIZER See: Parking Brake Lever/Service and Repair/Removal
11. REMOVE PARKING BRAKE CABLE END STOPPER See: Parking Brake Lever/Service and Repair/Removal
12. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY See: Parking Brake Lever/Service and Repair/Removal
13. REMOVE REAR WHEEL
14. REMOVE FRONT EXHAUST PIPE ASSEMBLY (for 2ZR-FE) See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Manifold/Service

and Repair/Removal

15. REMOVE CENTER EXHAUST PIPE ASSEMBLY (for 2AZ-FE) See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Manifold/Service

and Repair/Removal

16. REMOVE UPPER NO. 1 FRONT FLOOR HEAT INSULATOR

(a) Remove the 3 nuts and upper No. 1 front floor heat insulator.

17. REMOVE UPPER NO. 2 FRONT FLOOR HEAT INSULATOR

(a) Remove the 2 nuts and upper No. 2 front floor heat insulator.

18. REMOVE NO. 1 FUEL TANK PROTECTOR

Parking Brake Cable (for Double Wishbone Type Suspension)|Page 4574 > < Parking Brake Cable (for Double Wishbone Type Suspension)|Page 4572