toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Crankshaft Main Bearing > < Connecting Rod Bearing|Specifications
Page 1
background image

Connecting Rod: Specifications

CONNECTING ROD

PISTON SUB-ASSEMBLY WITH CONNECTING ROD

Step 1

Install and alternately tighten the bolts of the connecting rod cap in several steps.
Torque.......................................................................................................................................................................................25 Nm (250 kgf-cm, 18 ft-lbf)

Step 2

Mark the front of the connecting rod cap bolts with paint.
Retighten the cap bolts 90° as shown in the illustration.

Crankshaft Main Bearing > < Connecting Rod Bearing|Specifications