Matrix FWD L4-2.4L (2AZ-FE) (2009)
Drivetrain - Automatic Transmission/Transaxle - "U250E Automatic Transmission/Transaxle: Automatic Transaxle System: Road Test"
6. Install the Authorized Modifications Label.
A. Using a permanent marker enter the following information on the label:
^
ECM part number [Refer to the Parts In formation section for the CURRENT PART NUMBER]
^
Calibration ID(s) [Refer to the Calibration Identification Chart for the NEW CALIBRATION ID]
^
Dealer Code
^
Repair Date
^
Change Authority [This TSB number]
B. Affix the Authorized Modifications Label to the vehicle at the location shown in Figure 1. The Authorized Modifications Label is available
through the MDC P/N 00451-00001-LBL.