Matrix FWD L4-2.4L (2AZ-FE) (2009)
Camshaft Position Sensor: Service and Repair
Installation
2AZ-FE ENGINE CONTROL: CAMSHAFT POSITION SENSOR: INSTALLATION
INSTALLATION
1. INSTALL CAMSHAFT POSITION SENSOR
(a) Apply a light coat of engine oil to the O-ring of the sensor.
(b) Install the camshaft position sensor with the bolt.
Torque: 9.0 Nm (92 kgf-cm, 80 in-lbf)
(c) Connect the camshaft position sensor connector.
2. INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH HOSE See: Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Installation
3. INSPECT FOR ENGINE OIL LEAK
4. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Installation