Matrix FWD L4-2.4L (2AZ-FE) (2009)
7. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY
8. DISCONNECT REAR SEAT CENTER OUTER BELT ASSEMBLY
(a) Remove the bolt and the rear seat inner belt assembly, and disconnect the rear seat center outer belt assembly.
9. REMOVE REAR SEATBACK OUTER HINGE COVER (for RH Side) See: Body and Frame/Seats/Service and Repair/Rear Seat
Assembly/Removal
10. REMOVE REAR SEATBACK INNER HINGE COVER (for RH Side) See: Body and Frame/Seats/Service and Repair/Rear Seat
Assembly/Removal
11. REMOVE REAR SEATBACK ASSEMBLY RH See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly/Removal
12. REMOVE SEAT BELT ANCHOR COVER CAP
(a) Disengage the 2 claws and remove the seat belt anchor cover cap.
13. REMOVE REAR SEAT SHOULDER BELT HOLE COVER
(a) Disengage the 2 claws and 2 guides, and remove the rear seat shoulder belt hole cover.
14. REMOVE REAR SEATBACK BOARD See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly/Disassembly
15. REMOVE REAR SEAT CENTER OUTER BELT ASSEMBLY
(a) Remove the bolt and the rear seat center outer belt assembly.
16. REMOVE REAR DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
17. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal