Matrix FWD L4-2.4L (2AZ-FE) (2009)
(c) Using SST, steel plates and a press, install a new speed sensor to the rear axle hub and bearing assembly.
SST: 09214-76011
NOTICE:
-
Keep the rear speed sensor away from magnets.
-
Do not use a hammer to install the rear speed sensor.
-
Check that there is no foreign matter such as iron chips on the detecting portion of the rear speed sensor.
-
Slowly press the rear speed sensor in straight.
2. INSTALL REAR AXLE HUB AND BEARING ASSEMBLY WITH REAR SPEED SENSOR (for Torsion Beam Type Suspension) See:
Maintenance/Wheels and Tires/Wheel Hub/Service and Repair/Rear Axle Hub (for Torsion Beam Type Suspension)/Installation
3. INSTALL REAR AXLE HUB AND BEARING ASSEMBLY WITH REAR SPEED SENSOR (for Double Wishbone Type Suspension) See:
Maintenance/Wheels and Tires/Wheel Hub/Service and Repair/Rear Axle Hub (for Double Wishbone Type Suspension)/Installation
4. INSPECT REAR AXLE HUB BEARING LOOSENESS (for Double Wishbone Type Suspension) See: Maintenance/Wheels and Tires/Wheel
Hub/Testing and Inspection/Rear Axle Hub (for Double Wishbone Type Suspension)
5. INSPECT REAR AXLE HUB RUNOUT (for Double Wishbone Type Suspension) See: Maintenance/Wheels and Tires/Wheel Hub/Testing and
Inspection/Rear Axle Hub (for Double Wishbone Type Suspension)
6. INSPECT REAR AXLE HUB BEARING LOOSENESS (for Torsion Beam Type Suspension) See: Maintenance/Wheels and Tires/Wheel
Hub/Testing and Inspection/Rear Axle Hub (for Torsion Beam Type Suspension)
7. INSPECT REAR AXLE HUB RUNOUT (for Torsion Beam Type Suspension) See: Maintenance/Wheels and Tires/Wheel Hub/Testing and
Inspection/Rear Axle Hub (for Torsion Beam Type Suspension)
8. INSTALL REAR DISC (for Double Wishbone Type Suspension) See: Brakes and Traction Control/Disc Brake System/Service and
Repair/Overhaul/Rear Brake (for Double Wishbone Type Suspension)/Reassembly
9. INSTALL REAR DISC (for Torsion Beam Type Suspension) See: Brakes and Traction Control/Disc Brake System/Service and Repair/Removal
and Replacement/Rear Brake (for Torsion Beam Type Suspension)/Installation
10. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY (for Torsion Beam Type Suspension) See: Maintenance/Wheels and Tires/Wheel
Fastener/Service and Repair/Rear Axle Hub Bolt/Replacement
11. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY (for Double Wishbone Type Suspension) See: Maintenance/Wheels and Tires/Wheel
Fastener/Service and Repair/Rear Axle Hub Bolt/Replacement
12. CONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY (for Torsion Beam Type Suspension) See: Brakes and Traction Control/Disc Brake
System/Service and Repair/Removal and Replacement/Rear Brake (for Torsion Beam Type Suspension)/Installation
13. INSTALL PARKING BRAKE LEVER PROTECTOR (for Torsion Beam Type Suspension) See: Brakes and Traction Control/Parking Brake
System/Parking Brake Cable/Service and Repair/Parking Brake Cable (for Torsion Beam Type Suspension)/Installation
14. CONNECT REAR SPEED SENSOR WIRE (for Torsion Beam Type Suspension)
(a) Connect the rear speed sensor wire connector to the rear speed sensor.