Matrix FWD L4-2.4L (2AZ-FE) (2009)
Wiring Harness: Service and Repair
Installation
U250E AUTOMATIC TRANSMISSION / TRANSAXLE: TRANSMISSION WIRE: INSTALLATION
INSTALLATION
1. INSTALL TRANSMISSION WIRE
(a) Coat a new O-ring of the transmission wire connector with ATF WS and install it to the transmission wire.
(b) Install the transmission wire with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
(c) Connect the transmission wire connector.
2. CONNECT TRANSMISSION WIRE
(a) Coat the O-ring of the ATF temperature sensor with ATF WS.
(b) Install the ATF temperature sensor with the lock plate and bolt.
Torque: 6.6 Nm (67 kgf-cm, 58 in-lbf)
(c) Connect the transmission wire to the 7 shift solenoid valve connectors.
3. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY
(a) Install the 2 magnets in the oil pan.
(b) Apply adhesive or equivalent to 18 bolts.
Adhesive:
Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent