Matrix FWD L4-2.4L (2AZ-FE) (2009)
Windshield Washer Motor: Testing and Inspection
Washer Motor (for Front Side)
WIPER / WASHER: WASHER MOTOR (for Front Side): INSPECTION
INSPECTION
1. INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
(a) Remove the washer jar.
(b) Disconnect the windshield washer motor and pump connector.
HINT: The check should be performed with the windshield washer motor and pump installed on the washer jar.
(c) Fill the washer jar with washer fluid.
(d) Connect a battery positive (+) lead to terminal 1 of the windshield washer motor and pump, and a negative (-) lead to terminal 2.
(e) Check that washer fluid flows from the washer jar.
OK:
Washer fluid flows from the washer jar.
If the result is not as specified, replace the washer motor and pump assembly.