Matrix XR 2WD L4-1.8L (1ZZ-FE) (2003)
Speaker: Service and Repair
Front No. 2 Speaker
FRONT NO.2 SPEAKER ASSY
REPLACEMENT
1. REMOVE FRONT DOOR PULL HANDLE LH
2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSY (W/ POWER WINDOW)
3. REMOVE FRONT ARMREST BASE PANEL UPPER LH (W/O POWER WINDOW)
4. REMOVE FRONT DOOR WINDOW REGULATOR HANDLE ASSY (W/O POWER WINDOW)
5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSY LH
6. REMOVE FRONT NO.2 SPEAKER ASSY
a. Disconnect the connector.
b. Remove the 2 nuts and front No.2 speaker assy from the front door panel.
7. INSTALL FRONT NO.2 SPEAKER ASSY
a. Install the front No.2 speaker assy with the 2 nuts.
Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)
b. Connect the connector.