Matrix XR 2WD L4-1.8L (1ZZ-FE) (2003)
/Page-803002.png)
3. REMOVE PARKING BRAKE SWITCH ASSY
a. Remove the screw and parking brake switch assy.
4. INSTALL PARKING BRAKE SWITCH ASSY
a. Install the parking brake switch to the parking brake lever sub-assy with the screw.
5. INSTALL PARKING BRAKE LEVER SUB-ASSY
a. Install the parking brake cable assy No.1 to the parking brake lever, temporarily tighten the adjusting nut and lock nut.
b. Using a screwdriver, fix the parking brake cable No.1 to the pick.
c. Install the parking brake lever with the 2 bolts.
Torque: 12.5 Nm (130 kgf-cm, 9 ft. lbs.)