Matrix XR 2WD L4-1.8L (1ZZ-FE) (2003)
![background image](/toyota/matrix_xr_2wd/l4-1.8l_(1zz-fe)/Page-333012.png)
60. INSTALL TIMING GEAR COVER OIL SEAL
a. Apply MP grease to a new oil seal lip.
b. Using SST, tap in the oil seal until its surface is flush with the timing chain cover edge.
SST 09223-22010
NOTICE: Keep the lip off foreign materials.
61. INSTALL TIMING CHAIN OR BELT COVER SUB-ASSY
a. Remove any old packing material from the contact surface.
b. Apply seal packing in the shape of bead (Diameter 3.5 mm - 4.5 mm (0.1379 - 0.177 inch)) consequently as shown in the illustration.
Seal packing:
Water pump part part No. 08826-00100 or equivalent
Other part part No. 08826-00080 or equivalent.
NOTICE:
-
Remove any oil from the contact surface.
-
Install the oil pan within 3 minutes after applying seal packing.
-
Do not put into engine oil within 2 hours after installing.