Matrix XR 2WD L4-1.8L (1ZZ-FE) (2003)
B.
Remove the 3 nuts on the upper side of the front shock absorber assembly.
C.
Remove the front shock absorber with the coil spring.
5.
Prepare Insulating Material
A.
Locate the 2 mm EPT Sealer in the Wind Noise kit (P/N 08231-00810)
B.
Cut 3 pieces of EPT Sealer per side of vehicle (6 pieces total) to the following dimensions:
EPT Dimensions:
L: 100 mm (4 in.)
W: 13 mm (0.5 In.)
T: 2 mm (0.08 in.)
6.
Apply EPT Sealer To Upper Suspension Mount
NOTE:
Avoid applying the EPT sealer within 15 mm (0.6 in.) from the edge of the upper suspension mount bolts.