Matrix XR 2WD L4-1.8L (1ZZ-FE) (2003)
/Page-493003.png)
2. Never measure the resistance of the airbag squib (This may cause the airbag to inflate, which is very dangerous).
3. Grease should not be applied to the instrument panel passenger airbag assembly, and the airbag door should not be cleaned with detergents of
any kind.
4. Store the airbag assembly where the ambient temperature remains below 93 °C (200 °F), without high humidity and away from electrical
noise.
5. When using electric welding, first disconnect the airbag connector (2 yellow pins) installed on the assembly before starting work.
6. When disposing of a vehicle or the airbag assembly alone, the airbag should be inflated using an SST before disposal.
Perform the operation in a safe place away from electrical noise.
e. FRONT SEAT AIRBAG ASSEMBLY
1. Always place a removed or new front seat airbag assembly with the airbag inflation direction facing upward. Placing the airbag assembly with
the airbag inflation direction facing downward could cause a serious accident if the airbag inflates.
2. Never measure the resistance of the airbag squib (This may cause the airbag to inflate, which is very dangerous).
3. Grease should not be applied to the front seat airbag assembly, and the airbag door should not be cleaned with detergents of any kind.
4. Store the airbag assembly where the ambient temperature remains below 93 °C (200 °F), without high humidity and away from electrical
noise.
5. When using electric welding, first disconnect the airbag connector (2 yellow pins) installed on the assembly before starting work.
6. When disposing of a vehicle or the side airbag assembly alone, the airbag should be deployed using an SST before disposal.
Perform the operation in a safe place away from electrical noise.
f.
SEAT BELT PRETENSIONER
1. Never measure the resistance of the seat belt pretensioner (This may cause the seat belt pretensioner to activate, which is very dangerous).
2. Never disassemble the seat belt pretensioner.
3. Never install the seat belt pretensioner to another vehicle.